To resolve this issue thoroughly for it in his article today will provide detailed guidance for the way you block any website on the modem, router or your wifi transmitter. I think this is how fast and efficient that you should apply!
How to block websites on the modem?
You do turn following the steps below in your guide. And note that I only made a few genuine examples of modem, router ... decent severance, if you have different types of modems and did successfully then it can capture and send her back to her more for everyone to update use offline. Thanks kiu before
- Step 1: Access Modem, Router that you are managing.- Step 2: Once you have successfully logged in, you begin looking to its setup.
For modem Huawei
Please visit the => Next select as shown below
Next you make a selection as shown below:
- Enable URL Filter:
- Enable Smart URL Filter:
- Filter Mode: You choose the . And in case you want to block all web pages, just to access a page number you want, let alone as part done
=> Finally click on to add the sites you want to block on => then press to save and apply.
Examples here try to block their Facebook page or Youtube star light view
Now you can open a web browser and access to the site to try to block you just saw was not offline.
How to Block website For the TP-Link Modem
For modem TP-Link, you may choose in turn as follows:
=>
Sure . clic you select the => then you enter the site you want to block and click the save is finished.
For FPT Wifi Modem (GPON)
Similar to the model above, you do turn as follows:
- Visit the
- choose .
- Enable URL Filtering please tick to activate filters.
- URL Address: Import sites you want to block on.
- Filtering Rules: Select the Blacklist.
- To Add clic to add to the list of blocked sites.
- Clic to save.
=> Now you can try to access the blocked sites you recently viewed, certainly not to be then
Black or web block any site on the TP-Link Router
To block any site on the TP-Link router, the more steps a little bit, but in general is quite simple. You do the following:
1/ In the Menu you select is l => click Host => Clic Add New .
2/ Appears a new interface, you enter the following information:
- At the mode you select is .
- Host Description: This is the description alone, whatever you fill.
- LAN IP Address: Here you enter the address range that you want to block access, for example, enter the IP address from your 192.168.0.100 - 192.168.0.199, then all the computers receive IP in this range will not be able to access the page Once you've done web blocking.
- Click Save to save settings.
.
3/ Results like these are OK. Click Edit if you want to edit the.
4/Continuing, also in section you named => where you click
5/ Now we will be taken to one new interface, enter the following information:
- Mode: You select the Domain Name.
- Target Description: The description, whatever you type.
- Domain Name: Here you enter the site you want to block on. Eg Facebook, youtube, yahoo…
Note: You need to distinguish the Domain Name with the URL then, if you are only required to enter then you just need to enter the youtube, facebook .... without the need to enter the following suffixes (.com, .net ...). At this point all the domain names that contain keywords you enter will be blocked off.on the other, NULL, you must enter both the URL, eg https://www.facebook.com…..
clic Save to save setting.
6/ Finally you go to the window Rule and set as follows:
+ Built on line Enable Internet Access Control.
+ At the (Filter) you understand the following:
- Allow the packets specified by any enabled access control policy to pass through the Router: This option allows the site in the Target accessing the internet. (You can understand that it is the white list)
- Deny the packets specified by any enabled access control policy to pass through the Router: Blocking access to websites in the Target. (You can understand it is blacklisted) => in this case we will select the Deny.
+ Clic to save.
+ Next you clic as shown below.
7/ In the next window enter the following information:
- Rule Name: Named to manage more facilities.
- Host: You select in the list.
- Target: Select the list that you added in step 5.
- Schedule: Rule Anytime always choose to operate.
- Status section you select Enabled.
- Click Save to save settings.
8/ The results shown below are.
9/ Test come on, you go to try to block websites that you just see the star light is sure success then
Conclusion:
So that they have quite detailed instructions showing you how to block any website on the modem, router ... then jog. With this approach, you can easily manage your internet connection your computer system that manages it, you do not need to use a 3rd other software and do not have to do it manually on each machine again. Too great, right
Hopefully the article will be useful to you, to wish you success!
0 Response to "Guide to block any website on the modem, router or Access Point"
Post a Comment